>>>>>型號:GPU-3 控制和保護裝置

【功能描述】

 GPU-3控制和保護裝置操作靈活、配置簡單，可配合PLC使用來實現系統的功率管理。

GPU-3集成了發電機保護和同步功能。可提供串口與PLC、SCADA系統以及其它系統進行通訊。同時可將所有三相測量值和報警信息顯示在LCD顯示屏上。

如果把GPU-3當作具有起/停和保護功能的發動機控制裝置，可選發動機接口卡也擁有一個單獨的電源和一個獨立的微處理器。如果GPU-3處理器損壞，發動機接口卡將進入備用模式，以確保發動機監測不間斷。如果發生停機報警，發動機會自動停機。因此，它是用于機組控制和監測的可靠的解決方案。

>>>>>型號:GPU-3 控制和保護裝置

【英文介紹】

DEIF's GPU-3 control and protection device is flexible and simple to configure, and can be used with PLC to achieve system power management.

The GPU-3 integrates generator protection and synchronization. Serial port can be provided to communicate with PLC, SCADA system and other systems. At the same time, all three-phase measurement values and alarm information can be displayed on the LCD display.

If the GPU-3 is used as an engine control unit with start/stop and protection functions, the optional engine interface card also has a separate power supply and a separate microprocessor. If the GPU-3 processor is damaged, the engine interface card goes into standby mode to ensure uninterrupted engine monitoring. If the shutdown alarm occurs, the engine will automatically stop. It is therefore a reliable solution for unit control and monitoring.

>>>>>型號:GPU-3 控制和保護裝置