IC693MDL930 | 分立式輸出模塊 | 90-30 系列模塊化

IC693MDL930 | 分立式輸出模塊 | 90-30 系列模塊化　　IC693MDL930 是一款分立式輸出模塊，屬于 90-30 系列可編程邏輯控制器 (PLC) 系列，以前由 GE Fanuc 制造，現在隸屬于艾默生自動化。該模塊是單槽寬度、八 (8) 個獨立隔離的常開 (N.O.) 型 A 輸出觸點，與 90-30 系列模塊化和嵌入式中央處理器 (CPU) 模塊組件兼容，作為本地和

電話/Phone：18859254943 (微信同號)

郵箱/Email：sales@ygdcs.com

QQ：3561040004

在線咨詢

產品詳情

IC693MDL930 | 分立式輸出模塊 | 90-30 系列模塊化

IC693BEM331-(3).jpg

　　IC693MDL930 是一款分立式輸出模塊，屬于 90-30 系列可編程邏輯控制器 (PLC) 系列，以前由 GE Fanuc 制造，現在隸屬于艾默生自動化。該模塊是單槽寬度、八 (8) 個獨立隔離的常開 (N.O.) 型 A 輸出觸點，與 90-30 系列模塊化和嵌入式中央處理器 (CPU) 模塊組件兼容，作為本地和分布式 I/O 組件使用。此外，該模塊還支持現代 RX3i 和 RX7i 系統作為分布式輸出模塊。該模塊與電機起動器、電磁驅動裝置和指示燈兼容。IC693MDL930觸點輸出的額定電流為 4 安培，對于每點的阻性負載最大值;每個點的先導負載為 2 安培，UL 安裝為每個模塊 20 安培，而模塊的最小負載為 10 mA。每個觸點輸出可在 24 VDC 和 120 / 240 VDC 的標稱電壓下工作，而工作電壓范圍為 5-30 VDC / 5-250 VAC，頻率為 50/60 Hz。它還產生 5 安培的最大浪涌電流，而 On 和 Off 信號轉換的最大通道響應時間為 15 ms。該模塊的內部功耗為 6 mA(背板上 5 V 總線的所有輸出)，背板上繼電器 24V 總線的所有輸出為 70 mA。通過獨立隔離，每個輸出通道都可以在不同的電壓下工作，從而提供最大的操作靈活性。該模塊的隔離額定值為現場側和邏輯側之間的 1500 V，通道之間的隔離額定值為 500 V。

　　GE IC693MDL930模塊是數字輸出模塊。IC693MDL930輸出模塊可以安裝在GE Fanuc 90-30 PLC系統中5插槽或10插槽背板的任何插槽中。IC693MDL930模塊有 8 個常開繼電器電路，用于管理用戶負載。單個模塊輸出的輸出開關容量為 4 安培。每個模塊輸出都與其他模塊輸出隔離，每個模塊輸出都有自己的公共端子。IC693MDL930模塊不包括任何保險絲。連接到模塊輸出的用戶現場設備的電源需要由用戶供電。顯示每個輸出點狀態的 LED 指示燈位于模塊的頂部。

IC693BEM331-(3).jpg

　　The IC693MDL930 is a discrete output module in the 90-30 series Programmable Logic Controller (PLC) family, formerly manufactured by GE Fanuc and now owned by Emerson Automation. The module is A single-slot width, eight (8) independently isolated normally open (N.O.) type A output contact that is compatible with Series 90-30 modular and embedded central processing unit (CPU) module components for use as both local and distributed I/O components. In addition, the module supports modern RX3i and RX7i systems as distributed output modules. The module is compatible with motor starters, electromagnetic drives and indicators. The rated current output of the IC693MDL930 contact is 4 amps, with a maximum resistive load for each point; The pilot load at each point is 2 amps, the UL is installed at 20 amps per module, and the module has a minimum load of 10 mA. Each contact output can operate at nominal voltages of 24 VDC and 120/240 VDC, while the operating voltage range is 5-30 VDC / 5-250 VAC and the frequency is 50/60 Hz. It also produces a maximum surge current of 5 amps, while the maximum channel response time for On and Off signal conversion is 15 ms. The module's internal power consumption is 6 mA (all outputs of the 5 V bus on the backplane) and all outputs of the relay 24V bus on the backplane are 70 mA. With independent isolation, each output channel can operate at different voltages, providing maximum operational flexibility. The module has an isolation rating of 1500 V between the field side and the logical side, and an isolation rating of 500 V between channels.

　　The GE IC693MDL930 module is a digital output module. The IC693MDL930 output module can be installed in any slot of the 5-slot or 10-slot backplane in the GE Fanuc 90-30 PLC system. The IC693MDL930 module has eight normally open relay circuits for managing user loads. The output switch capacity of a single module output is 4 amps. Each module output is isolated from the other module output, and each module output has its own common terminal. The IC693MDL930 module does not include any fuses. The power supply for the user field device connected to the module output needs to be supplied by the user. An LED indicator indicating the status of each output point is located at the top of the module.

標簽： IC693MDL930