IC697ALG320 | 90-70 系列 | 可編程邏輯控制器 (PLC)
IC697ALG320是 90-70 系列可編程邏輯控制器 (PLC) 的高級模擬輸出模塊，以前由 GE Fanuc 制造，而不是由 Emerson Automation 制造。該模塊設計用于占用 5 插槽或 10 插槽底板的單個插槽，并從背板汲取最大電流 1.66A (8.3 瓦) (5VDC) 和從用戶電源汲取 150 mA 電流以啟用電流輸出。該IC697ALG320配有四 (4) 個單獨配置的輸出通道，專門產生電壓和電流輸出、0-20 mA / 4-20 mA 電流輸出信號和 -10VDC / +10 VDC 電壓輸出信號。它內置數模轉換器 (DAC) 電路，分辨率為 16 位，具有單調性，電壓每 LSB 步進 312.5 微伏，4 至 20 mA 每 LSB 步進 0.5 微安。它對所有模擬輸出通道的轉換速率最大為2.0 ms。該模塊在出廠時使用模塊的EEPROM存儲的校準數據進行校準。它還具有連續短路功能，不會造成任何損害，一旦故障得到解決，輸出會自動恢復到正常狀態。模擬輸出負載規格包括電阻負載最小 2000 ms，容性負載最大 1000 皮法(配置為電壓操作)。對于電流操作，電阻負載的輸出負載規格高達 700 歐姆;容性負載最大 1.0 微法拉，感性負載最大 250 毫亨利。模塊的精度受特定溫度系數的影響，電壓為每攝氏度 25 PPM，當前操作為每攝氏度 50 ppm。
IC697ALG320模擬量輸出模塊是由GE發那科制造的4通道模擬量輸出模塊。該模塊的 4 個輸出可單獨配置為電壓或電流操作。它提供具有 16 位分辨率和 14 位單調性的雙極性或單極性輸出。輸出的更新速率為 2 毫秒。它在 +5 伏時消耗的最大功率為 1.66 安培(8.3 瓦)，此輸出模塊的推薦工作電壓為 24 伏直流電。該模塊的一些特性包括快速更新速率、可單獨配置的輸出通道(可單獨進行用戶縮放)、工廠校準和隔離式輸出電路。IC697ALG320模擬輸出模塊還提供診斷功能，如量程外和量程下檢測、開路檢測、配置錯誤檢測和模塊運行狀況檢測。
GE IC697ALG320模擬輸出模塊設計用于 GE 90-70 系列可編程邏輯控制器。該模塊的基本功能是從控制處理單元接收數字?jǐn)?shù)據并執行數模轉換以輸出模擬信號。它確保輸出受到過壓和瞬態條件的保護。它將校準數據保存在其非易失性EEPROM中。用戶可以連接多個IC697ALG320輸出模塊，以存檔多達 252 個輸出通道。建議一個 CPU 機架最多連接 7 個模塊，擴展機架最多連接 8 個模塊。配置軟件可以安裝在PC上，以執行輸出范圍選擇、用戶縮放和故障報告。用戶縮放提供了根據特定控制器和應用的需求輕松將輸出數據轉換為不同單位的功能。
The IC697ALG320 is an advanced analog output module for the 90-70 series programmable logic controllers (PLCS), previously manufactured by GE Fanuc, not Emerson Automation. The module is designed to occupy A single slot on a 5-slot or 10-slot baseboard and draws a maximum current of 1.66A (8.3 Watts) (5VDC) from the backplane and 150 mA from the user's power supply to enable current output. The IC697ALG320 is equipped with four (4) individually configured output channels specifically designed to generate voltage and current outputs, 0-20 mA / 4-20 mA current output signals, and -10VDC / + 10VDC voltage output signals. It has a built-in digital-to-analog converter (DAC) circuit with a 16-bit resolution and monotonia, with voltages of 312.5 microvolts per LSB step and 0.5 microamps per LSB step from 4 to 20 mA. It has a maximum conversion rate of 2.0 ms for all analog output channels. The module is calibrated at the factory using calibration data stored in the module's EEPROM. It also has a continuous short-circuit function that does not cause any damage, and once the fault is resolved, the output will automatically return to the normal state. Analog output load specifications include a minimum of 2000 ms for resistive loads and a maximum of 1000 picometres for capacitive loads (configured for voltage operation). For current operation, resistive loads have output load specifications up to 700 ohms; The maximum capacitive load is 1.0 microfarad and the maximum inductive load is 250 millihenri. The accuracy of the module is affected by a specific temperature coefficient, the voltage is 25 PPM per degree Celsius, and the current operation is 50 ppm per degree Celsius.
The IC697ALG320 analog output module is a 4-channel analog output module manufactured by GE Fanuc. The module's four outputs can be individually configured for voltage or current operation. It provides bipolar or unipolar outputs with 16-bit resolution and 14-bit monotonicity. The update rate of the output is 2 milliseconds. It consumes a maximum power of 1.66 amps (8.3 Watts) at +5 volts, and the recommended operating voltage for this output module is 24 volts DC. Some of the module's features include fast update rates, individually configurable output channels for individual user scaling, factory calibration, and isolated output circuits. The IC697ALG320 analog output module also provides diagnostic functions such as out-of-range and off-range detection, open circuit detection, configuration error detection, and module health detection.
The GE IC697ALG320 analog output module is designed for the GE 90-70 series programmable logic controllers. The basic function of the module is to receive digital data from the control processing unit and perform digital-to-analog conversion to output analog signals. It ensures that the output is protected from overvoltage and transient conditions. It stores calibration data in its non-volatile EEPROM. Users can connect multiple IC697ALG320 output modules to archive up to 252 output channels. You are advised to connect a CPU rack to a maximum of seven modules and an extension rack to a maximum of eight modules. Configuration software can be installed on a PC to perform output range selection, user scaling, and fault reporting. User scaling provides the ability to easily convert output data into different units depending on the needs of a particular controller and application.
