IC697CPU731 | PLC中央處理器 | 可支持8K模擬量I/0
系列 :90-70系列
零件編號 :IC697CPU731
產品類型 :PLC中央處理器
微處理器類型: 80C186 微處理器
IC697CPU731 PLC中央處理器還采用各種微處理器，包括通用微處理器、單片機和位片式微處理器等，以適應不同的性能需求。例如，小型PLC大多數采用8位單片機，中型PLC大多數采用16位甚至32位單片機。
在PLC系統中，中央處理器與輸入設備、輸出設備以及存儲器等硬件組成完整的PLC控制系統，用于實現各種自動化控制任務，如生產線控制、機器人控制、智能建筑控制和能源系統控制等。這些應用都得益于PLC中央處理器的強大功能和高效運算能力。
IC697CPU731的參數如下:
處理器類型:12 MHZ、32 KB的中央處理器，使用80C186微處理器
插槽位置:單個插槽位于PLC機架內
編程和配置軟件:使用MS-D0S或Windows編程軟件(通過以太網TCP/IP或通過
SNP端口)對該模塊執行正確的編程和配置
I/0模塊支持:最多可支持8K模擬量I/0塊，包括IC697的離散和模擬模塊系列
通信接口:使用標準格式的VMEC.1與智能選件模塊和I/0進行通信
操作模式:用戶可以使用三位操作模式開關或編程軟件控制模塊操作
狀態指示:存在三個綠色LED，它們指示CPU狀態
Series :90-70 series
Part number :IC697CPU731
Product type :PLC CPU
Microprocessor type: 80C186 microprocessor
IC697CPU731 PLC CPU also uses a variety of microprocessors, including general purpose microprocessors, single-chip microprocessors and bit-slice microprocessors, to adapt to different performance requirements. For example, most of the small PLC use 8-bit single-chip microcomputer, medium-sized PLC most use 16-bit or even 32-bit single-chip microcomputer.
In the PLC system, the central processor and input devices, output devices and memory and other hardware composed of a complete PLC control system, used to achieve a variety of automatic control tasks, such as production line control, robot control, intelligent building control and energy system control. These applications benefit from the power and efficient computing power of the PLC central processor.
The parameters of IC697CPU731 are as follows:
Processor type :12 MHZ, 32 KB central processing unit, using the 80C186 microprocessor
Slot location: A single slot is located in the PLC rack
Programming and configuration software: Use MS-D0S or Windows programming software (over Ethernet TCP/IP or through
SNP port) perform the correct programming and configuration for the module
I/0 Module support: Up to 8K analog I/0 blocks can be supported, including the discrete and analog module family of the IC697
Communication interface: Use VMEC.1 in standard format to communicate with intelligent option modules and I/0
Operation mode: The user can use the three-position operation mode switch or programming software to control the module operation
Status indicator: There are three green leds that indicate the CPU status
