IC693CPU351 | 離散輸出模塊 | 最多 32640字的寄存器存儲器
型號：IC693CPU351
處理器速度: 25兆赫
I/O 積分:2048
寄存器存儲器: 240KB字節
浮點數學: 是的
IC693CPU351支持大量 /0，特別是2048 個商散輸入點(961);2048 離散輸出點(90)和模擬 V0字因所使用的軟件而異，但最大可配置模擬 /0 為 32，640 字。此 CPU 可用的其他
內部寄存器數量為 1280 位二進制全局存儲器;4096 位存儲線圈:256位臨時輸出線圈;:128 位系統狀態參考;最多 32640字的寄存器存儲器和 28000 字的系統寄存器，僅可用于參考表查看。
IC693CPU351 離散輸出模塊是工業自動化和控制系統的關鍵組成部分，它可以分為交流型和直流型兩種，這兩種類型的模塊都可以提供大范圍電壓輸出。
IC693CPU351 離散輸出模塊的主要功能是：當處理器將一個二進制數“1”存儲在存儲器特定地址時，為連接在離散輸出模塊端子上的電動機啟動線圈、指示燈、電磁閥等輸出設備提供能量。此外，離散輸出模塊也裝有狀態指示燈，用來顯示每個獨立輸出端的工作狀態。有些模塊為每個輸出端配置了兩個狀態指示燈，其中一個稱為邏輯指示燈，當邏輯指示燈亮起時，表示處理器已經在邏輯上接通了輸出設備;另一個稱為輸出指示燈，當輸出指示燈亮起時，表示已經有實際電流流入輸出設備。在故障診斷中，狀態指示燈非常重要，因此，在任何情況下，都要保證狀態指示燈指示正確。
Model: IC693CPU351
Processor speed: 25 MHZ
I/O score :2048
Register memory: 240KB bytes
Floating point math: Yes
IC693CPU351 supports a large number of /0, especially 2048 quotient scatter input points (961); 2048 Discrete output points (90) and analog V0 words vary depending on the software used, but the maximum configurable analog /0 is 32,640 words. This CPU is available for others
The number of internal registers is 1280 bits binary global memory; 4096-bit storage coil: 256-bit temporary output coil : 128-bit system status reference; Register memory of up to 32,640 words and system registers of 28,000 words are available for reference table viewing only.
IC693CPU351 discrete output module is a key component of industrial automation and control system, it can be divided into AC type and DC type two, both types of modules can provide a wide range of voltage output.
The main function of the IC693CPU351 discrete output module is: when the processor stores a binary number "1" in the memory at a specific address, it provides energy for the motor starting coil, indicator light, solenoid valve and other output devices connected to the discrete output module terminals. In addition, the discrete output module is also equipped with a status indicator to show the working status of each individual output. Some modules are configured with two status indicators for each output end, one of which is called the logic indicator. When the logic indicator is on, it means that the processor has logically connected the output device. The other is called the output indicator, and when the output indicator is on, it means that there is actual current flowing into the output device. In fault diagnosis, the status indicator is very important, so in any case, ensure that the status indicator is correct.
