>>>>>型號:IS220PPRFH1A 主網關模塊 模擬輸出包

【功能描述】

產品描述

型號IS220PPRFH1A在通用電氣生產的Mark VI系列中被描述為PROFIBUS主網關模塊。雖然該型號設計用于Mark VI系列，但它也可用于Mark VIe和Mark VIeS系列。PPRF模型被視為模擬輸出包，通常與IS200SPIDG1A附件ID板一起使用。I/O包和端子板一起經過評級和認證，可用于危險和非危險場所。

使用IS220PPRFH1A型號時，必須遵循電氣規范，以消除潛在的財產損失或在某些情況下的人身傷害。有兩種規格，標有電壓和電流。電源電壓范圍為27.4至28.6 VDC，標稱電源電壓為28.0 VDC。PPRF電池組使用的電源電流最大為0.18 ADC。PPRF模型還必須使用特定的溫度范圍;該溫度范圍為-4至131°F或-20至55°C。

如上所述，IS220PPRFH1A型號被評定用于危險和非危險場所。對于每個位置，都有一個列表認證。無害認證為UL E207685，與I類2區A、B、C、D組和I類2區IIC組認證相同。ATEX Zone 2，Group IIC的認證是UL DEMKO 12 ATEX 1114875X。如需更多認證，請參閱GEH-6725 Mark VIe和Mark VIeS控制設備HazLoc手冊。

 >>>>>型號:IS220PPRFH1A 主網關模塊 模擬輸出包

【英文介紹】

Product description

The model IS220PPRFH1A is described in the Mark VI series produced by General Electric as a PROFIBUS main gateway module. While this model is designed for the Mark VI series, it is also available for the Mark VIe and Mark VIeS series. The PPRF model is considered an analog output package and is commonly used with the IS200SPIDG1A Accessory ID board. The I/O packet and the terminal board together are rated and certified for use in hazardous and non-hazardous locations.

Electrical codes must be followed when using IS220PPRFH1A models to eliminate potential property damage or, in some cases, personal injury. There are two sizes, labeled voltage and current. The supply voltage ranges from 27.4 to 28.6 VDC, and the nominal supply voltage is 28.0 VDC. The PPRF battery pack uses a supply current of up to 0.18 ADC. The PPRF model must also use a specific temperature range; This temperature range is -4 to 131°F or -20 to 55°C.

As mentioned above, the IS220PPRFH1A model is rated for use in hazardous and non-hazardous locations. For each location, there is a list authentication. The harmless certification is UL E207685, the same as the Class I 2 Area A, B, C, D and Class I 2 Area IIC Group certification. The certification of ATEX Zone 2, Group IIC is UL DEMKO 12 ATEX 1114875X. For further certification, please refer to the GEH-6725 Mark VIe and Mark VIeS Control Equipment HazLoc Manual.

>>>>>型號:IS220PPRFH1A 主網關模塊 模擬輸出包