>>>>>型號:503-26606-21 伺服驅動器 多媒體控制器
【功能描述】
503-26606-21 DANAHER技術規格
503-26606-21伺服驅動技術作為數控機床、工業機器人及其它產業機械控制的關鍵技術之一，在國內外普遍受到關注。在20世紀最后10年間，微處理器(特別是數字信號處理器——DSP)技術、電力電子技術、網絡技術、控制技術的發展為伺服驅動技術的進一步發展奠定了良好的基礎。如果說20世紀80年代是交流伺服驅動技術取代直流伺服驅動技術的話，那么，20世紀90年代則是伺服驅動系統實現全數字化、智能化、網絡化的10年。這一點在一些工業發達國家尤為明顯。
503-26606-21伺服驅動器按照其控制對象由外到內分為位置環、速度環和電流環，相應伺服驅動器也就可以工作在位置控制模式、速度控制模式和力矩控制模式。 當伺服驅動器工作在任意模式下，其對應 模式可以由三種方式給定：1、使用模擬量給定；2、參數設置的內部給定；3、通訊給定。 參數設置的內部給定應用比較少，為有限的有級調節。
>>>>>型號:503-26606-21 伺服驅動器 多媒體控制器
【英文介紹】
503-26606-21 Technical specifications of DANAHER
503-26606-21 Servo drive technology, as one of the key technologies of CNC machine tools, industrial robots and other industrial machinery control, has been widely concerned at home and abroad. In the last 10 years of the 20th century, the development of microprocessor (especially digital signal processor - DSP) technology, power electronics technology, network technology, and control technology has laid a good foundation for the further development of servo drive technology. If the 1980s was AC servo drive technology to replace DC servo drive technology, then the 1990s is the servo drive system to achieve full digital, intelligent, networked 10 years. This is particularly evident in some industrially developed countries.
503-26606-21 servo drive is divided into position ring, speed ring and current ring according to its control object from outside to inside, and the corresponding servo drive can work in position control mode, speed control mode and torque control mode. When the servo drive works in any mode, its corresponding mode can be set by three ways: 1. 2. Internal setting of parameters; 3, communication given. The internal given application of the parameter setting is relatively small, and it is limited graded adjustment.
>>>>>型號:503-26606-21 伺服驅動器 多媒體控制器
