>>>型號:5464-658 數字速度傳感器模塊 用于各種工業環境
【功能描述】
5464-658是數字速度傳感器模塊。
5464-658數字速度傳感器模塊無需額外的信號調理或校準，從而簡化了維護并降低了復雜性。它旨在提供準確的速度測量，而無需使用電位計或需要頻繁的校準調整。這確保了長期的可靠性，并最大限度地減少了
速度測量中的潛在誤差或偏差。
速度傳感器輸入
讀取 MPU 和接近探頭輸入，并為應用程序提供速度。如果需要，應用軟件提供導數輸出。Analog Combo 模塊對速度傳感器輸入進行濾波，濾波時間常數可通過應用軟件程序在 8 毫秒或 16 毫秒之間進行選擇。
對于大多數應用程序，8 毫秒就足夠了。對于速度非常慢的應用，可能需要 16 毫秒。模塊將檢測到的最大速度由速度范圍決定。軟件的控制輸出將檢測速度范圍的五十分之一的最小速度。
這樣可以檢測故障的速度傳感器，這有助于防止由于在非常低的速度下更新時間緩慢而導致的超速。
>>>>型號:5464-658 數字速度傳感器模塊 用于各種工業環境
【英文介紹】
5464-658 is a digital speed sensor module.
The 5464-658 digital speed sensor module requires no additional signal conditioning or calibration, simplifying maintenance and reducing complexity. It is designed to provide accurate speed measurements
without the use of potentiometers or the need for frequent calibration adjustments. This ensures long-term reliability and minimizes potential errors or deviations in speed measurements.
Speed sensor input
Read the MPU and approach probe input and provide speed to the application. Application software provides derivative output if required. The Analog Combo module filters the speed sensor input, and the
filtering time constant can be selected between 8 ms or 16 ms by an application software program.
For most applications, 8 milliseconds is sufficient. For very slow applications, it might take 16 milliseconds. The maximum speed that the module will detect is determined by the speed range. The control output
of the software will detect a minimum speed of one-fiftieth of the speed range.
This can detect faulty speed sensors, which helps prevent overspeed due to slow update times at very low speeds.
>>>>型號:5464-658 數字速度傳感器模塊 用于各種工業環境
