>>>型號:1784-KTX 通信接口卡 用于自動化系統
【功能描述】
1784-KTX是NetLinx系列的一種通信接口卡。該卡是一種半長ISA卡，可以安裝在16位的ISA或EISA插槽中，但絕對不能安裝在8位擴展槽中。卡上僅有一個通道，并且它還可以作為遠程I/O掃描器使用。
1784-KTX卡可以充當DH+或DH-485網絡上的一個節點，并直接連接到PLC-2/PLC-3控制器。這種卡在工業自動化系統中扮演著重要的角色，可以實現對設備和系統的精確控制和監控。
1784-KTX卡的工作溫度范圍為32至140華氏度，儲存或運輸時的環境溫度范圍應為-40至185華氏度。同時，卡周圍的非冷凝相對濕度應保持在5%到95%之間。該卡的振動等級為10至60赫茲，位移為0.012英寸。
在安裝1784-KTX卡之前，必須配置卡的中斷設置和基本內存地址。并且，由于它基于CMOS技術，對靜電放電（ESD）敏感，因此在處理時需要格外小心。
>>>>型號:1784-KTX 通信接口卡 用于自動化系統
【英文介紹】
The 1784-KTX is a communication interface card of the NetLinx series. The card is a half-length ISA card that can be installed in a 16-bit ISA or EISA slot, but definitely not in an 8-bit expansion slot. There
is only one channel on the card, and it can also be used as a remote I/O scanner.
The 1784-KTX card can act as a node on a DH+ or DH-485 network and connect directly to a PLC-2/PLC-3 controller. This card plays an important role in industrial automation systems, enabling precise control
and monitoring of equipment and systems.
The 1784-KTX card operates in a temperature range of 32 to 140 degrees Fahrenheit, and the ambient temperature range for storage or transportation should be -40 to 185 degrees Fahrenheit. At the same time,
the non-condensing relative humidity around the card should be maintained between 5% and 95%. The card has a vibration rating of 10 to 60 Hz and a displacement of 0.012 inches.
Before installing the 1784-KTX card, the interrupt Settings and basic memory address of the card must be configured. And, because it is based on CMOS technology and is sensitive to electrostatic discharge (ESD),
extra care is needed when handling it.
>>>>型號:1784-KTX 通信接口卡 用于自動化系統
