>>>>>型號:MMS6110 雙通道軸振動測量模塊

【功能描述】

MMS6110是一款雙通道軸振動測量模塊，主要用于監測軸的徑向相對振動。

它采用渦流傳感器的輸出來測量軸的振動，每個通道都可以獨立使用。

此外，這種模塊的測量可以和其他模塊的測量一起組成渦輪機械保護系統，或者作為輸入提供給分析診斷系統、現場總線系統、分散控制系統等。

MMS6110的特點包括：

雙通道設計，可以同時監測兩個軸的振動。

采用渦流傳感器，無需接觸軸即可測量振動。

具有可擴展的自檢功能，包括內置傳感器自檢功能和口令保護操作級。

支持冗余電源輸入，提高系統的可靠性。

可以與多種通信協議兼容，如RS232、RS485等，方便與其他系統進行數據交換。

>>>>>型號:MMS6110 雙通道軸振動測量模塊

【英文介紹】

The MMS6110 is a two-channel shaft vibration measurement module designed to monitor the radial relative vibration of shafts.

It uses the output of the eddy current sensor to measure the vibration of the shaft, and each channel can be used independently.

 In addition, measurements of this module can be combined with measurements of other modules to form turbomachinery protection 

systems, or provided as input to analytical diagnostic systems, fieldbus systems, decentralized control systems, etc.

Features of the MMS6110 include:

Dual channel design allows simultaneous monitoring of vibration of both axes.

Vibration can be measured without shaft contact with eddy current sensor.

Features scalable self-check capabilities, including built-in sensor self-check and password protected operation levels.

Supports redundant power inputs to improve system reliability.

It can be compatible with a variety of communication protocols, such as RS232, RS485, etc., to facilitate data exchange with other systems.

>>>>>型號:MMS6110 雙通道軸振動測量模塊