>>>>>型號:IS215UCVEM10A 控制器板

【功能描述】

IS215UCVEM10A 是一款控制器板。

這款控制器板被設計為雙面電路板，裝有小電容器和電阻器，用于容納和去除能量。電路板上還使用了多種集成電路，保存著執行特定功能所需的信息。

IS215UCVEM10A包括附在電路板上的前面板，該面板包括兩個固定螺釘（一個頂部和一個底部），有助于在安裝后將整個模塊鎖定到機架上。

面板也有一個復位按鈕位于其中心附近，以及三個狀態LED位于其頂部邊緣附近。此外，面板上還有許多連接端口，包括一個鍵盤和鼠標端口、

一個顯示器端口、兩個RS-232C com端口、一個mezz卡插槽和兩個以太網端口。

Mark VI系統提供主要功能，如啟動期間的速度控制、發電機的自動同步、渦輪超速保護和正常并網運行期間的渦輪負載控制。

而IS215UCVEM10A作為其中的一部分，為實現這些功能提供了必要的硬件支持。

>>>>>型號:IS215UCVEM10A 控制器板

【英文介紹】

The IS215UCVEM10A is a controller board.

The controller board is designed as a double-sided circuit board with small capacitors and resistors to house and remove energy. A variety 

of integrated circuits are also used on the circuit board, holding the information needed to perform specific functions.

The IS215UCVEM10A includes a front panel attached to a circuit board that includes two setting screws (one top and one bottom) to help 

lock the entire module to the rack after installation. The panel also has a reset button located near its center, and three status leds located 

near its top edge. In addition, there are a number of connection ports on the panel, including a keyboard and mouse port, a monitor port, 

two RS-232C com ports, a mezz card slot, and two Ethernet ports.

The Mark VI system provides key functions such as speed control during start-up, automatic generator synchronization, turbine overspeed 

protection and turbine load control during normal grid-connected operation. The IS215UCVEM10A, as a part of it, provides the necessary 

hardware support for realizing these functions.

>>>>>型號:IS215UCVEM10A 控制器板