IS200JPDMG1A  |  配電板  |   用于Mark VI系統

零件編號：IS200JPDMG1A

功能描述 ：配電板

PCB涂層： 普通涂層

產品描述

該IS200JPDMG1A是通用電氣制造的PCB組件，用于Mark VI系統。 Mark VI 是 Speedtronic 燃?xì)廨啓C和蒸汽輪機管理系列的一部分，該系列已使用數十年。MKVI 是該系列中最先進的產品之一，包括以太網通信、控制模塊內的三重冗余控制配置和 HMI 操作員界面等功能，所有這些都圍繞在 Windows 平臺上運行的 PC 構建。

硬件提示和規格

正如其行業昵稱JPDM所揭示的那樣，IS200JPDMG1A是一個配電板。 該板由兩個 50 針連接器 （P1/P2.） 和 12 個保險絲組成，這些保險絲分布在三條線路中。該板具有一個 DC62 母連接器 （JA1），可與 PPDA I/O 包結合使用。IS200JPDMG1A板有兩個接線端子，它們分別放置在PCB上彼此相對的兩側。這些接線端子可接入三條獨立的電源總線。位于接線端子上的每個螺釘?shù)淖畲筝斎霝?35 安培。IS200JPDMG1A共有13個插頭，包括3個9位插頭、7個2位插頭和3個6位插頭。該板還包括：

四個壓敏電阻

三個電感線圈

晶體管

各種電阻器

和眾多電容器

該IS200JPDMG1A采用DIN導軌安裝。在安裝尺寸方面，這款配電板相對較小，為 6.5 英寸 x 7 英寸。GE出版物GEI-100613將提供有關JPDM板的規格、診斷、操作和安裝的更多信息。

Part number: IS200JPDMG1A

Function Description: Power distribution board

PCB coating: Ordinary coating

Product description

The IS200JPDMG1A is a PCB component manufactured by General Electric for use in Mark VI systems. The Mark VI is part of the Speedtronic gas turbine and steam turbine management series, which has been in use for decades. The MKVI is one of the most advanced products in the family and includes features such as Ethernet communication, triple redundant control configuration within the control module and an HMI operator interface, all built around a PC running on the Windows platform.

Hardware tips and specifications

As its industry nickname JPDM reveals, the IS200JPDMG1A is a switchboard. The board consists of two 50-pin connectors (P1/P2.) and 12 fuses, which are distributed in three lines. The board has a DC62 female connector (JA1) that can be used in combination with PPDA I/O packages. The IS200JPDMG1A board has two terminals, which are placed on opposite sides of the PCB. These terminals can be connected to three separate power buses. The maximum input for each screw located on the terminal is 35 amps. The IS200JPDMG1A has a total of 13 plugs, including 3 9-bit plugs, 7 2-bit plugs and 3 6-bit plugs. The board also includes:

Four varistors

Three inductors

transistor

Various resistors

And numerous capacitors

The IS200JPDMG1A is mounted with DIN rail. In terms of mounting size, this switchboard is relatively small at 6.5 inches x 7 inches. The GE publication GEI-100613 will provide more information on the specification, diagnosis, operation, and installation of JPDM boards.