IC697CPM915RR  |   單插槽可編程CPU模塊

型號：IC697CPM915RR

　　模塊類型： 浮點 CPU

　　插槽數量： 1 (單插槽)

　　點數： 12K 輸入和輸出(任意混音)

　　支持： IC660/IC661 I/O 和 IC697 I/O

　　所需電流： 2.8 安培標稱值

　　IC697CPM915RR 是由GE Fanuc制造的90-70系列中的32 MHz，32位浮點中央處理器。 該 CPU 由 MS-DOS 或 Windows 軟件編程，可實時控制機器、流程和物料搬運。它通過機架安裝的背板與 I/O 和智能選件模塊進行通信。部分功能包括單插槽 CPU、1 MB 同插槽電池備份存儲器、12K 混合輸入和輸出、高達 8K 模擬 I/O 以及可配置的數據/程序存儲器。該IC697CPM915支持浮點計算，每個布爾函數的執行時間為 0.4 微秒。

　　IC697CPM915RR 支持多種選件模塊，包括 IC697 系列中的所有 IC697 LAN 接口模塊、多個協處理器模塊、IC660/661 總線控制器和分立/模擬 I/O 模塊。 IC697CPM915通過閃存存儲操作系統固件;但是，此模塊不支持存儲用戶程序。固件無需拆卸或更換EPROM即可更新。固件更新是通過將兼容的 PC 連接到串行端口并運行提供的 Loader 軟件來進行的。

　　IC697CPM915RR 該模塊可以通過控制三位 RUN/STOP 開關或通過遠程連接的編程器和相應的軟件來操作。程序/配置數據通過密碼或使用按鍵開關手動鎖定。如果密鑰是“受保護的”，則數據只能由僅與BTM(總線發射器模塊)并聯的編程器進行調整。模塊正面的四個綠色 LED 顯示 CPU 狀態。IC697CPM915應使用提供的手冊正確安裝。電池可以連接到任一連接器。撥動開關應處于 STOP 位置，按鍵開關應處于 Memory Protection OFF 位置。機架電源也應關閉。然后可以將模塊安裝在插槽 1 中并啟動電源。

　　Model: IC697CPM915RR

　　Module type: floating point CPU

　　Number of slots: 1 (single slot)

　　Points: 12K input and output (any mix)

　　Support: IC660/IC661 I/O and IC697 I/O

　　Required current: 2.8 amps nominal value

　　The IC697CPM915RR is a 32 MHz, 32-bit floating point CPU in the 90-70 series manufactured by GE Fanuc. The CPU is programmed by MS-DOS or Windows software to control machines, processes, and material handling in real time. It communicates with the I/O and smart option modules through a rack-mounted backplane. Some features include a single-slot CPU, 1 MB of same-slot battery backup memory, 12K mixed input and output, up to 8K analog I/O, and configurable data/program memory. The IC697CPM915 supports floating-point calculations and has an execution time of 0.4 microseconds per Boolean function.

　　The IC697CPM915RR supports a variety of optional modules, including all IC697 LAN interface modules in the IC697 family, multiple coprocessor modules, IC660/661 bus controllers, and discrete/analog I/O modules. IC697CPM915 stores operating system firmware via flash memory; However, this module does not support storing user programs. Firmware can be updated without removing or replacing the EPROM. Firmware updates are done by connecting a compatible PC to a serial port and running the provided Loader software.

　　IC697CPM915RR The module can be operated by controlling the three-digit RUN/STOP switch or through a remotely connected programmer and corresponding software. Program/configuration data is locked manually with a password or by using a key switch. If the key is "protected", the data can only be adjusted by a programmer that is only in parallel with the BTM (Bus transmitter module). Four green leds on the front of the module show the CPU status. The IC697CPM915 should be properly installed using the manual provided. The battery can be connected to either connector. The toggle switch should be in the STOP position and the key switch should be in the Memory Protection OFF position. The rack power should also be turned off. You can then install the module in slot 1 and start the power supply.