>>>>>型號:RMP-112D 繼電器

【功能描述】

RMP-112D是一種過載反向功率繼電器，主要用于發電機DIN導軌。

它有多種功能，如原動力的保護、三階段測量、警報條件的LED征兆、Timer-controlled絆倒被激活的中轉的LED征兆等。RMP-112D具有35mm DIN路軌或基地架置，安裝類型為DIN導軌，觸發電壓范圍在最多125V和最少25V之間。
RMP-112D過載反向功率繼電器在配置PTMPM模塊時應將其配置為“外部”模塊。訂購信息顯示，PTMPM模塊及其PTMIM接口板被視為一套匹配的組件，因此，它們通常不單獨銷售。然而，這兩條電纜可以單獨訂購。
此外，RMP-112D繼電器在配置過程中涉及到PTM產品線，該產品線包含PTMPM、其匹配的PTMIM和19“（0.5米）接口電纜。值得注意的是，RMP-112D的狀態邏輯不使用梯形邏輯類型指令，而是使用“自然語言”編程指令。

>>>>>型號:RMP-112D 繼電器

【英文介紹】

The RMP-112D is an overload reverse power relay that is mainly used in generator DIN rails. 

It has a variety of functions, such as prime force protection, three-stage measurement, LED warning of alarm conditions, Timer-controlled trip activated transit LED warning, etc. The RMP-112D has a 35mm DIN rail or base mount and is mounted on a DIN rail with a trigger voltage range between up to 125V and a minimum of 25V.
The RMP-112D Overload reverse power relay should be configured as an "external" module when configuring the PTMPM module. Ordering information shows that the PTMPM module and its PTMIM interface board are considered a set of matching components, and as such, they are not usually sold separately. However, the two cables can be ordered separately.
In addition, the RMP-112D relay is configured with the PTM product line, which includes PTMPM, its matching PTMIM, and 19 "(0.5 m) interface cable. It is worth noting that the RMP-112D's state logic does not use ladder logic type instructions, but instead uses "natural language" programming instructions.

>>>>>型號:RMP-112D 繼電器