>>>>>型號:8715-CA-BI 總線接口模塊 集成了可編程邏輯

【功能描述】

MTL 8715-CA-BI是一個集成了可編程邏輯和數字信號處理(DSP)功能的FPGA器件，具有高速并行處理能力,適用于各種數字信號處理應用。

它具有以下特點:

高速并行處理能力: 8715-CA-BI采用并行架構,可以同時處理多個數據流,適用于需要高速處理的數字信號處理應用。

可編程邏輯和DSP功能: MTL831B集成了可編程邏輯和數字信號處理功能,可以靈活地實現各種數字信號處理算法和邏輯控制功能。高性能存儲器: 8715-CA-BI內置了高性能的存儲器，可以存儲大量的數據和處理結果，適用于需要大量數據存儲和處理的應用。背板當作為遠程 I/O使用時，PAC8000 節點使用一個總線接口模塊（BIM）通過一個局域網（LAN）與主機控制器進行通信。總線接口模塊（BIM） 根據其功能提供多種不同的包裝形式，并且每個模塊都安裝在專用 BIM 底板上。

信號保護:MTL8715-CA-BI在輸入和輸出之間設置了隔離和保護電路,可以保護輸出設備免受輸入電路中的過電壓、過電流等因素的影響。提高系統可靠性:MTL8715-CA-BII的信 號隔離和保護作

可以提高系統的可靠性,降低系統故障率,延長設備使用壽命。

MTL 8715-CA-BI總線接口模塊底座熱交換CI854A支持熱交換。它可以在線更換,不會對連接到CEX總線的其他單元造成任何干擾。在熱移除和隨后的插入之后,該單元將自動配置。在冗余配置

中,可以在不干擾主單元的情況下更換備用單元。這包括如果設備出現故障,可以在線更換。為了支持熱交換,不需要配置。運行中的熱配置(HCIR)在運行中進行熱配置時,可以在線配置從屬設

備,而無需初始化PROFIBUS通熱交換CI854A支持熱交換。它可以在線更換,不會對連接到CEX總線的其他單元造成任何千擾。在熱移除和隨后的插入之后,該單元將自動配置。在冗余配置中，

可以在不干擾主單元的情況下更換備用單元。這包括如果設備出現故障,可以在線更換。為了支持熱交換,不需要配置。

MTL 8715-CA-BI 數字量控制模塊是一款用于控制和監控?cái)?shù)字量輸入/輸出的模塊。該模塊提供 8 個數字量輸入端口和 4 個數字量輸出端口，可用于連接各種類型的傳感器和執行器。該模塊還支持多種控制模式，包括開關、按鈕和繼電器。MTL 8715-CA-BI 數字量控制模塊是控制和監控?cái)?shù)字量輸入/輸出的理想選擇，可廣泛應用于各種工業應用。以下是 MTL 8715-CA-BI 數字量控制模塊的具體功能：8 個數字量輸入端口：MTL 8715-CA-BI 數字量控制模塊具有 8 個數字量輸入端口，可用于連接各種類型的傳感器和執行器。

4 個數字量輸出端口：MTL 8715-CA-BI 數字量控制模塊具有 4 個數字量輸出端口，可用于控制各種類型的執行器。多種控制模式：MTL 8715-CA-BI 數字量控制模塊支持多種控制模式，包括開關、按鈕和繼電器。高可靠性：MTL 8715-CA-BI 數字量控制模塊采用高可靠的設計，可在各種惡劣環境下工作。寬工作溫度范圍：MTL 8715-CA-BI 數字量控制模塊的工作溫度范圍為 -40°C 至 85°C，可適應各種環境。小巧輕便：MTL 8715-CA-BI 數字量控制模塊小巧輕便，便于安裝和維護。

 >>>>>型號:8715-CA-BI 總線接口模塊 集成了可編程邏輯

【英文介紹】

MTL 8715-CA-BI is an FPGA device that integrates programmable logic and digital signal processing (DSP) capabilities with high-speed parallel processing capabilities for a variety of digital signal processing applications.

It has the following characteristics:

High-speed parallel processing capability: 8715-CA-BI uses a parallel architecture that can process multiple data streams simultaneously, making it suitable for digital signal processing applications that require high-speed processing.

Programmable logic and DSP functions: The MTL831B integrates programmable logic and digital signal processing functions, which can flexibly implement various digital signal processing algorithms and logic control functions. High performance memory: 8715-CA-BI has a built-in high performance memory that can store a large amount of data and processing results, which is suitable for applications that require a large amount of data storage and processing. When used as remote I/O, the PAC8000 nodes use a bus interface module (BIM) to communicate with the host controller over a local area network (LAN). Bus interface modules (BIM) are available in a number of different packaging forms depending on their function, and each module is mounted on a dedicated BIM backboard.

Signal protection: The MTL8715-CA-BI has an isolation and protection circuit between the input and output, which can protect the output device from overvoltage, overcurrent and other factors in the input circuit. Improve system reliability: Signal isolation and protection for MTL8715-CA-BII

It can improve the reliability of the system, reduce the system failure rate, and extend the service life of the equipment.

MTL 8715-CA-BI bus interface module Base Heat exchange The CI854A supports heat exchange. It can be replaced online without causing any interference to other units connected to the CEX bus. After hot removal and subsequent insertion, the unit is automatically configured. In redundant configuration

The backup unit can be replaced without interfering with the primary unit. This includes being able to replace the device online if it fails. To support heat exchange, no configuration is required. Hot Configuration on the Run (HCIR) Slave devices can be configured online during hot configuration on the run

The CI854A supports heat exchange without the need to initialize the PROFIBUS. It can be replaced online without causing any disturbance to other units connected to the CEX bus. After hot removal and subsequent insertion, the unit is automatically configured. In a redundant configuration,

The backup unit can be replaced without disturbing the primary unit. This includes being able to replace the device online if it fails. To support heat exchange, no configuration is required.

MTL 8715-CA-BI Digital Quantity Control module is a module for controlling and monitoring digital quantity input/output. The module provides 8 digital input ports and 4 digital output ports, which can be used to connect various types of sensors and actuators. The module also supports a variety of control modes, including switches, buttons and relays. The MTL 8715-CA-BI Digital quantity control module is ideal for controlling and monitoring digital quantity input/output and can be used in a wide range of industrial applications. The following are the specific functions of the MTL 8715-CA-BI digital quantity control module: 8 digital quantity input ports: The MTL 8715-CA-BI digital quantity control module has 8 digital quantity input ports that can be used to connect various types of sensors and actuators.

4 digital output ports: The MTL 8715-CA-BI digital output control module has 4 digital output ports that can be used to control various types of actuators. Multiple control modes: The MTL 8715-CA-BI digital quantity control module supports multiple control modes, including switches, buttons and relays. High reliability: The MTL 8715-CA-BI digital quantity control module has a highly reliable design and can operate in a variety of harsh environments. Wide operating temperature range: MTL 8715-CA-BI digital quantity control module operating temperature range of -40°C to 85°C, can be adapted to a variety of environments. Compact and lightweight: The MTL 8715-CA-BI digital volume control module is compact and lightweight, making it easy to install and maintain.

>>>>>型號:8715-CA-BI 總線接口模塊 集成了可編程邏輯